Plus-sizing 225/45R17 to 17″ wheels on 255 mm tires
| Recommended size | 255/40R17 |
|---|---|
| Exact aspect ratio needednearest made is 40 | 39.7 |
| Overall diameter+0.24% | 24.97″ → 25.03″ |
| Within ±1% (plus-size target)as close as the available sizes allow | Yes |
| Within ±3% (general limit)speedometer, ABS and stability control all read off this | Yes |
| Sidewall height1% — this is what changes the ride | 3.99″ → 4.02″ |
| Section width+30 mm — check clearance at full lock | 225 → 255 mm |
| Rim stepplus 0 | 17″ → 17″ |
- Current size
- 225/45R17
- New wheel
- 17 in
- New width
- 255 mm
The whole point is that diameter does not change
Plus-sizing means a bigger wheel and a shorter sidewall, adding up to the same rolling diameter. Go up 0″ of rim and the sidewall has to lose exactly half of that on each side.
Holding 225/45R17's 24.97″ overall diameter on a 17″ wheel with a 255 mm tire needs an aspect ratio of 39.7. Tires are not made in continuous aspect ratios — the nearest is 40, which lands the new diameter at 25.03″, or 0.24% from stock.
The target here is ±1%, not ±3%
The general limit for tire changes is 3%, because that is where speedometers, ABS and stability control start reading meaningfully wrong. Plus-sizing is held to about 1%, and the reason is simple: this is a change you chose to make. There is no reason to accept an error you introduced for looks.
What you are trading away
Sidewall goes from 3.99″ to 4.02″. That is sharper steering response and a firmer ride, and it is also a much higher chance of bending a wheel on a pothole. Below about 4 inches of sidewall, potholes start costing wheels rather than tires.
The wheel also gets heavier as the tire gets lighter — and the wheel is unsprung, rotating mass, which is the worst possible place to add weight for acceleration, braking and ride. Check the actual wheel weight before assuming bigger looks better and drives better.
Section width is not tread width
255 mm is the widest point of the sidewall. Check it at full steering lock and full suspension compression, not sitting still in the driveway.
Notes
- Plus-sizing keeps the overall diameter and changes everything else. Going up 0″ of rim means losing -0.03″ of sidewall on each side, which is why the aspect ratio has to come down from 45 to 40.
- 0.24% is inside the ±1% that plus-sizing aims for. This is a discretionary change, so the standard is tighter than the ±3% used for off-road tyre upgrades — there is no reason to accept an error you chose to introduce.
- Less sidewall is the trade you are making, and it is a real one. 4.02″ of rubber between the rim and the road means sharper steering response, a firmer ride, and a much higher chance of bending a wheel on a pothole. Below about 4″ of sidewall, potholes start costing wheels rather than tyres.
- The wheel gets heavier as the tyre gets lighter, and the wheel is unsprung and rotating. Plus-sizing frequently adds weight where it hurts acceleration, braking and ride quality most — check the actual wheel weight before assuming bigger looks better and drives better.
- Section width is the widest point of the sidewall, not the tread. 255 mm needs checking at full steering lock and full suspension compression, not just sitting still.
Nearby sizes
- Plus-sizing 215/45R17 to 17″ wheels on 255 mm tires
- Plus-sizing 225/65R17 to 17″ wheels on 255 mm tires
- Plus-sizing 205/65R15 to 17″ wheels on 255 mm tires
- Plus-sizing 235/45R17 to 17″ wheels on 255 mm tires
- Plus-sizing 225/45R17 to 18″ wheels on 255 mm tires
- Plus-sizing 225/45R17 to 19″ wheels on 255 mm tires
- Plus-sizing 225/45R17 to 17″ wheels on 245 mm tires
- Plus-sizing 225/45R17 to 17″ wheels on 265 mm tires
- Plus-sizing 225/45R17 to 17″ wheels on 235 mm tires
- Plus-sizing 225/45R17 to 17″ wheels on 275 mm tires
Read more
- What Is a 33-Inch Tire in Metric? Seven Answers, RankedSeven common metric sizes get called 33s. They span half an inch in height and nearly two inches in width, and the width is what decides whether they fit.
- Reading a Tire Sidewall: Every Marking, in OrderThe size is the part everyone reads. The characters after it are the part that decides whether the tire is legal on your vehicle.
- Metric to Inches Tire Size: Both Directions, WorkedMetric to inches is arithmetic with one answer. Inches to metric has many answers, because you are choosing among sizes that happen to land near your target.
- Comparing Two Tire Sizes: The Four Numbers That ChangeComparing sizes by diameter alone hides the change that most often causes the problem. Four numbers move when you change a tire, and they move independently.